Part #s: 5137882-463 - 5136122-266
OEM Peg,Mount,Shifter Pedal and linkage
Off 2013 Vegas
In Good Usable condition
No rash or damage
Finish is peeling on support and rubbed off on shifter
Includes all parts shown
Look closely at images - What you see is what you get
Fits: 06-16 Vegas, Jackpot, Kingpin, Gunner, Highball & Hammer models

Part #s:5631841 &5631842
Good Used Condition
No rash or bad defects
Some finish blems & wear marks
Look closely at images - what you see is what you will get
Fits: Kingpin & Vegas Models

• Good usable condition
• No rash or major damage
• Both exhaust tips are dinged up
• Heat shields and mufflers look okay
• Header Pipes are discolored and have surface rust
• Includes all parts show
• Look closely at images - What you see is what you get
• Fits 100 and 106 models- '06-'16 Vegas, Vegas 8-Ball, Kingpin, Gunner, Judge, Boardwalk, and Highball. (06-07 need O2 Plugs - Not Included)
• Will also fit Cross Bikes Hardball & Magnum but will need NOT Included bag brackets
  

Part #: 3280627 & 5254043
Off 2013 Vegas with 15,253 miles
Very Good Condition with exceptions listed below
Light spots of surface ruct on mount in hidden areas under bottom and on back
Tested and Driven see images
Includes all parts shown
Look closely at images - What you see is what you get
Fits 2011-17 Boardwalk, Gunner, Hammer, Highball, Jackpot, Judge,Kingpin,Vegas & Cross Roads- note: mount will not work with Cross Roads just the speedo

Part #: 4012718
Off 2013 Vegas with 13,253 miles
Good Condition
Normal wear & use marks
Some Rash on fins & Chips in finish
Tested and Driven
Includes all parts shown
Look closely at images - What you see is what you get
Fits: 08-17 Vegas, Hammer, Jackpot, Kingpin, Highball, Boardwalk, Judge Models

Part #: 4012376
Key Cylinder & Key Set
Off 2009 Kingpin
Very Good Condition
Tested - Works great
Includes all parts shown
Look closely at images - What you see is what you get
Fits: Victory 06-17 Models

Part #: 1911624-266
Off 09 Kingpin
Tested and Driven
Rotor is in Good Usable Condition
Light wear on brake pad contact area
Finish Blems as shown in images
Includes all parts shown
Look closely at images - What you see is what you get
Does Not fit Cruiser models
Fits all 03-up Steel Frame models - Vegas, Kingpin, etc. Front or Rear
Fits Front Only on all Cross Country Models models - Magnum Hardball Vision

• Part #: 2410947


• Really Good Condition
• has one small mark on right edge that is hard to see


• Light use marks


• Tested see images


• Includes all parts shown


• Look closely at images - What you see is what you get


• Fits:09-17 Victory Vegas, Highball, Gunner & Jackpot Models also 03-04 Vegas

Dynojet Power Commander V Part #: 19-002
Really Good Condition
Normal wear & use marks
Tested & Driven
Includes all parts shown
Fits: 09-15 Victory 106 Models

Power Commander Product Description Listed Below:

"*Compact design for discrete placement & easy uninstallation to revert to stock settings
*Unit has a -100/+250% fuel change range - automatically giving you the best mix of performance & fuel efficiency at all times
*10 throttle position columns
*Vast library of tunes for any combination of aftermarket parts
*Easily change and upgrade tunes as you upgrade parts
*Comes with PowerCore software that connects dyno runs with fuel tuners to unlock your ride's potential
*Upgradeable with additional features such as auto-tune and launch control (included on fuel & ignition models, available through the ignition module accessory on all other models)
*Analog input which allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
*Easily connects to your computer via USB
*Each cylinder can be mapped individually and for each gear - Giving riders more granular control"

Part #: 5134622,5136038,5134179,1016619
Off a 2009 Kingpin
Floorboard support has Rash and scratches on bottom
Floorboard rashed bad but comes with good used replacement in images
Tested and Driven
Includes all parts shown
Look closely at images - What you see is what you get
Fits all Steel Frames - Kingpin Vegas Etc

Part #: 5414150 or 5415873
Has 11.8 mm tank fitting
Note some 09-12 models have the smaller 9.5mm tank fitting make sure yours has the 11.8 size
Off 2009 Kingpin with 24,837 on odometer
Good Condition
Normal wear & use marks
Look closely at images - What you see is what you get
Fits: 09-17 Gunner, Kingpin, Vegas, Hammer, Jackpot, & Highball Models

Part #: 2520881
Off 2009 Kingpin with 24,837 on odometer
Tested and Driven
Really good used condition
Normal wear and use marks
Comes with all parts shown
Look closely at images - what you see is what you will get
Fits: 08-17 Victory Models

2008-17 Rear Brake line is for use with Floorboards
Part #: 1911092
Off a 2009 Kingpin
Normal wear & use marks
Tested and Driven
Look closely at images - What you see is what you get
Fits: 08 and newer Steel Frames - Boardwalk, Gunner, Kingpin, Vegas, Jackpot, Hammer

Part #: 5134178,1911094,5135457
Off a 2009 Kingpin
Very Good Used Condition
Foot Peg is marked up on the edge
Tested and Driven
Includes all parts shown
Look closely at images - What you see is what you get
Fits 08 and Newer Steel Frame Models with floorboards - Boardwalk,Vegas, Gunner, Kingpin, etc

• Part # 7081602
• Clutch cable
• Really Good Used Condition
• No cable fraying on ends
• Normal wear & use marks
• Tested and driven - see video below
• Look closely at images - what you see is what you will get
• Fits: 10-17 Cross Country,Cross Roads,Hard Ball, and Magnum

• 18" OEM Rear Wheel
• Part #: 1521153-266
• Shinko Long Haul with good tread
• Really Good used condition
• Spins straight
• Finish has light belms as shown in pics
• Look closely at images - what you see is what you will get
• OEM Fit for 09-16 Kingpin & Vegas will fit 06 and newer but has 09-16 thread lug holes for pulley

• Part #: 1014212 - Black
• Off 2009 Kingpin
• Fender has rash and a small dent in the rash as shown
• The rest is in good shape with light blems and use marks
• Look closely at images - what you see is what you will get
• Fits: 04-12 Kingpin Models

Part #: 4012376
Key Cylinder & Key Set
Off 2013 Vegas
Very Good Condition
Tested - Works great
Includes all parts shown
Look closely at images - What you see is what you get
Fits: Victory 06-17 Models

Part #: 1823815-1823817 & 5138509
Left & Right OEM Kayaba Manufactured Front Forks plus the axle
2009 Kingpin with 24,837 on odometer
Good Used Condition with exceptions listed below
Forks are Straight - Seals are good
Finish blems on lowers, upper tubes marked where triple trees and windshield clamp it - left side has blem at base of upper tube
Tested and Driven
Includes all parts shown
Look closely at images - What you see is what you get
Fits: All Victory Kingpin Models

• Part #: 5247719
• Off 2009 Kingpin with 24,837 on odometer
• Good usable condition


• Finish is scratched as shown
• Includes hardware





• Look closely at images - what you see is what you will get
• Fits: All 06 and up Victory Steel frames- Hammer, Kingpin, Vegas, Jackpot etc

Part #: 4011030/4012419
Off 2009 Kingpin with 24,837 on odometer
Tested and driven
Good working Condition
Normal wear & use marks
Small Finish blems as seen in pics
Includes all parts shown
Look closely at images - What you see is what you get
Fits all 05-17 Victory models except Octane

OEM Part #: 1322632 with Barnett Scorpion Clutch kit Upgrade
Barnett kit looks new
Fits: 08-10 Hammer, Vegas, Kingpin, Jackpot, Cross Country, Cross Roads, & Vision Models
Off a 2009 Kingpin with 24,837 on odometer
Very Good Condition
Driven and Tested
Normal wear & use marks
Includes all parts shown
Look closely at images - What you see is what you get

Part #: 3022183, 5632406, 5135471, 1014712, 5135358
Off a 2009 Kingpin
Good Condition Overall
Spots of light color staining
Valve and Sprocket covers have contact marks from exhaust clamp
Blems should be hidden when installed
Primary and Timing Gear Covers are in Very Good condition
Includes all parts shown - Primary Cover, Valve covers, Cam Drive Covers, Primary Plate Cover, Sprocket Cover
Look closely at images - What you see is what you get
Fits all 2008-10 Models except sprocket cover does not fit Jackpot & Hammer

Part #: 1322603
Off 2013 Vegas
Tested and Driven
Very Good condition
Light wear and use marks
Paint chips at base of mirror mount hole
Comes with all parts shown - safety switch, lever, mirror etc.
Look closely at images - what you see is what you will get
Fits: 08-17 Victory Models except Vision and Octane