• OEM Part
• Part #: 5137911-463
• For Left hand side
• Off a 2014 Judge
• Very Good Used Condition
• Light wear & use marks
• Includes all parts shown
• Look closely at images - What you see is what you get
• Fits all Judge Models

• OEM Part
• Part #: 5137912-463
• For Right hand side
• Off a 2014 Judge
• Good Used Condition
• Some light scratches
• Light wear & use marks
• Includes all parts shown
• Look closely at images - What you see is what you get
• Fits all Judge Models

• New in unopened pack
• Kurakyn Model; #1729
• Fits 1" Handlebars
• Instant accessibility to your beverage while on the go
• Features "fingers" to firmly grasp onto various sized containers and keep in drink holder
• Black gloss piece quality construction that blends in with your bike; Black mesh basket and solid bottom ensuring your container does not slip through holder
• Includes 1" handlebar clamp, drink holder basket, anti-seize packet, and hardware kit: (2) shims, (1) 5/16" split lock washer, and (1) thumb nut; Set of hex wrenches suggested for installation (not included)
• Multi-fit for 1" bars and will fit 7/8" bars with separate adapter kit (not included); Ideal for 2" to 3 1/2" diameter containers

Good Condition
106 Badge has small blems
Light Scuffs & Use marks on Wedges
Look closely at images - what you see is what you will get

Good Condition
Light Scuffs & Use marks on Wedges
Scuffed area from key fob
Look closely at images - what you see is what you will get

• Used Parts
• In Very Good used condition
• Light wear & use marks
• Smaller Timing Wheel Cover will need need emblem tape for installation
• Look at the images
• What you see is what you will get
• Fits 03 and Newer Victory Freedom engines

Part #s:1823275-156 & 5135924-156
Off a 2006 Jackpot
Excellent condition
Light wear and use marks
Includes all parts shown
Look closely at images - What you see is what you get
Fits: Will fit all 05 & Up Steel Frame Models

• This is a New Part in factory package
• Billet twin cooler set
• Features two independent 1-1/8" diameter cooler
  canisters
• Comes with 4 billet clamps for mounting to 1" front frame tubes.
• Custom application for 1" front frame tubes
• Could be used with other frame sizes by fabbing mounts to fit
• Chrome Finish
• V-Twin Manufacturing Part Number:  40-0349

• Part #: 2875687
• Fits: All 07 and Up Models with a Bullet Light - Vegas Kingpin Highball etc
• Off 2008 Vegas


• Normal wear and use marks


• Tested and works great


• Includes all parts shown


• Look closely at images - what you see is what you will get

Part #: 2878374
Used Part
Overall Good usable Condition
Right side has light finish blem that is hard to show in pics
Black finish is worn from key fob around the ignition hole on left side
Includes all parts shown
Look closely at images - What you see is what you get

• Build your own kit
• Includes both Headers, Collector and Rear mount
• Does not include any other hardware
• Raw steel will have some surface rust discoloration
• Fits all 100 and 106 Victory bikes except Hammer and Jackpot
• 06-07 year models need O2 Plugs - Not Included
• Includes all parts shown
• Look closely at images - What you see is what you get
  

• This is basically the equivalent to New without original box
  
• Installed on a project bike but never wired up or used
• Everything that was in the package is included
• Additionally there is a switch for using in the inner fairing dash of a Cross Country or Magnum
• The switch that is included from Avon mounts on the handle bars
• No marks at all like new
• Fits All Victory except Octane
• Victory Throttle Ring is already installed
• Avon's description listed below
  
  "Air ride for your hands, custom for your bike!" The Avon Air Cushion metric anodized Spike grips just feel right in your hands. Manufactured in the USA with Kraton rubber and featuring a very soft serrated texture to help hang on to your bike. " The grips are finished off with only the best - 6061 black anodized Spike end caps and collars.We have worked hard to create the best feeling metric touring grips for both warm and cold riding conditions.

Part #: 2878374
Used Part
Overall Good Condition
Right side is excellent
Black finish is worn from key fob on left side
Includes all parts shown
Look closely at images - What you see is what you get

• Build your own kit
• Includes both Headers, Collector and Rear mount
• Does not include any other hardware
• Coated headers will have some surface rust discoloration
• Fits all 100 and 106 Victory bikes except Hammer and Jackpot
• 06-07 year models need O2 Plugs - Not Included
• Includes all parts shown
• Look closely at images - What you see is what you get
  

Dynojet Power Commander V Part #: 19-002
Really Good Condition
Normal wear & use marks
Tested & Driven
Includes all parts shown
Fits: 09-15 Victory 106 Models

Power Commander Product Description Listed Below:

"*Compact design for discrete placement & easy uninstallation to revert to stock settings
*Unit has a -100/+250% fuel change range - automatically giving you the best mix of performance & fuel efficiency at all times
*10 throttle position columns
*Vast library of tunes for any combination of aftermarket parts
*Easily change and upgrade tunes as you upgrade parts
*Comes with PowerCore software that connects dyno runs with fuel tuners to unlock your ride's potential
*Upgradeable with additional features such as auto-tune and launch control (included on fuel & ignition models, available through the ignition module accessory on all other models)
*Analog input which allows user to install any 0-5 volt sensor and build an adjustment table based on its input such as boost or temperature
*Easily connects to your computer via USB
*Each cylinder can be mapped individually and for each gear - Giving riders more granular control"

• New with a small dent under the new finish on the right side up tube that we could not get to show up in a picture - looks like a small ripple in the finish that should not be noticeable when mounted
• Gloss Black Powder Coat
• New Part - Hand Made in USA Tig Welded and Professionally Powder Coated
• Slotted for internal wiring
• Look at images for exact measurements
• Can be lowered down for more reach or raised up for a more dynamic look
• 1 1/4" Main tubing frame with 1" mounting, control cube and grip areas
• When changing from OEM bars the alignment dowel  in control cube will need to be removed by breaking off and/or filing or by grinding with a Dremel tool
• Cross Country, Hardball and Magnum with ABS should fit with stock cables and brake line by adjusting/realigning them.
• Cross Country, Hardball and Magnum With Out ABS will need a longer brake line
• Cross Roads and all other Victory Models will need longer Cables and Brake Line
• Does Not fit Vision or Octane

• Build your own kit
• Includes both Headers, Collector, Rear mount & Heat Shields
• Does not include any other hardware
• Heat Shields are scratched
• Coated headers will have some surface rust discoloration
• Fits all 100 and 106 Victory bikes except Hammer and Jackpot
• 06-07 year models need O2 Plugs - Not Included
• Includes all parts shown

• Part # 2875942
• This is an Original Victory Part - not aftermarket
• New in the box, still in the sealed wrapper
• Includes all parts shown
• Look closely at images - What you see is what you get
• Fits 08-17 Vegas, Gunner, High Ball, Kingpin, Hammer, Jackpot, Judge & Boardwalk

• Good usable condition
• No rash or major damage
• Both exhaust tips are dinged up
• Heat shields and mufflers look okay
• Header Pipes are discolored and have surface rust
• Includes all parts show
• Look closely at images - What you see is what you get
• Fits 100 and 106 models- '06-'16 Vegas, Vegas 8-Ball, Kingpin, Gunner, Judge, Boardwalk, and Highball. (06-07 need O2 Plugs - Not Included)
• Will also fit Cross Bikes Hardball & Magnum but will need NOT Included bag brackets
  

• Off 2014 Cross Roads
• Tested and Driven
• Set up for For ABS Cross Bikes
• Could be used on other 2010-17 Victory models but would probably need a different brake line
• Right side of handlebars is bent in at riser area - the do not appear to be twisted just bent straight in
• Arlen Ness Rad III Controls, Levers and Tear Drop Mirrors
• Chrome control cubes with internal wiring
• Added length Braided cables
• Braided brake line hose with adapter block for abs line
• Kuryakyn grips
• Other than the bent bars everything is in really good condition
• Because of the internal wiring decided to sell it as a unit
• 14" Rise at the grips Can be lowered down for more reach or raised up for a more dynamic look
• 1 1/2" Main tubing frame with 1" mounting, control cube and grip areas
• Cross Country, Hardball and Magnum with ABS  
• Cross Country, Hardball and Magnum With Out ABS and other 2010-17 models would probably need a different brake line
• Does Not fit Vision or Octane